Philips PerfectCare 6000 (PSG6064/80) specifications
Each specification with its source and what it changes in use. We separate the manufacturer’s data, the Amazon listing data and what no public data tells you.
Specifications at a glance
| Specification | Value | Source |
|---|---|---|
| Model number | PSG6064/80, black and gold | Manufacturer |
| Type | Steam generator iron | Manufacturer |
| Power | 2400 W | Manufacturer, Amazon listing |
| Pump pressure | 8 bar | Manufacturer, Amazon listing |
| Continuous steam | 150 g/min | Manufacturer, Amazon listing |
| Steam boost | Up to 600 g | Manufacturer, Amazon listing |
| Technology | OptimalTEMP, single temperature | Manufacturer |
| Soleplate | SteamGlide Advanced, 6 layers, stainless steel base | Manufacturer, Amazon listing |
| Tank | 1.8 L, removable, can be refilled at any time | Manufacturer, Amazon listing |
| Quoted running time | Up to 1 hr 30 of continuous use | Amazon listing |
| Water | Suitable for tap water | Philips documentation |
| Descaling | Smart Calc Clean, container supplied, sound and light reminder | Philips documentation |
| Heat-up time | About 2 minutes | Philips documentation |
| Iron weight | 1.2 kg | Philips documentation |
| Iron and base weight | 3.4 kg | Philips documentation |
| Dimensions | 36.8 × 16.8 × 26.9 cm | Manufacturer |
| Power cord | 1.65 m | Philips documentation |
| Hose | 1.6 m | Philips documentation |
| Safety | Auto shut-off, carry lock | Philips documentation |
| Other | Drip stop, precision tip, vertical steaming, eco mode | Philips documentation |
| Manufacturer warranty | 2 years | Philips documentation |
The PerfectCare 6000 range includes several model numbers (PSG6020, PSG6026, PSG6064, PSG6066…) with different steam outputs and finishes. The values above are for the PSG6064/80. Check the model number on the Amazon offer before you buy, along with the plug type.

What each figure means
2400 W of power
Power governs how fast the unit heats up and how well it produces steam continuously. 2400 W is a typical figure for a mid-range steam generator; the most powerful models go beyond 3000 W. Real consumption depends on how long you iron: our calculator estimates the yearly cost.
8 bar of pressure
This is the maximum pressure of the pump that pushes water to the heating chamber. It helps the steam come out with force and get into thick fabrics. On its own, this figure does not measure how much steam is produced. Our article on pressure, bar and steam output explains it in detail.
150 g/min of continuous steam
This is the amount of steam produced each minute while you iron. At 150 g/min, the PerfectCare 6000 sits at the upper end of the mid-range. It is the clearest indicator of speed.
Steam boost of up to 600 g
An extra burst of steam on demand for stubborn creases: the knees of jeans, a crumpled collar, linen. You use it in short bursts, not continuously.
OptimalTEMP
The Philips technology that pairs a single soleplate temperature with a matched steam output. There is no thermostat: Philips guarantees no burns on any ironable fabric, even if the iron is left resting on the garment or the board.
SteamGlide Advanced soleplate
A six-layer coating on a stainless steel base, for glide and scratch resistance. Philips gives it 5 stars on both counts. It has a precision tip for tight areas.
1.8 L tank
Clear, removable and fillable at the tap at any time, even halfway through ironing. Philips quotes up to 1 hr 30 of continuous use.
1.2 kg iron
An average weight for a steam generator: it presses firmly enough on thick fabrics without tiring you out over a long session. The whole unit weighs 3.4 kg with the base.

The manufacturer’s claims, decoded
| Claim | What you should know |
|---|---|
| “Guaranteed no burns” | A Philips commitment for fabrics that are ironable according to their care label. Fabrics marked with a crossed-out iron are still excluded. |
| “Up to 1 hr 30 of continuous use” | The time quoted for a full tank. It varies with how often you use the steam boost and how much steam you use. |
| “Compact and practical” | 36.8 × 16.8 × 26.9 cm and 3.4 kg: among the compact steam generators, but bulkier than an iron. |
| “Suitable for tap water” | Limescale is handled by Smart Calc Clean descaling, which you run when the light asks for it. |
What the data does not tell you
No public data gives the exact soleplate temperature, the lab-measured steam output of this specific model or its noise level in decibels. Que Choisir, the French consumer association, tests steam generators with steam output measured to European standard 60311, crease-removal trials on a test bench and an endurance test, but part of the results is for subscribers only. We would rather point out these gaps than invent figures.
The same goes for lifespan: it depends on how hard your water is, how regularly you descale and how much you iron. Our guide on how to descale a steam generator iron explains how to keep it performing well.
Frequently asked questions
Does the PerfectCare 6000 have a steam setting?
Steam is released with the trigger on the iron, with a steam boost for stubborn creases. There is no thermostat: the temperature is fixed thanks to OptimalTEMP. The documentation also mentions an eco mode.
How long is the hose?
1.6 m according to Philips documentation, with a 1.65 m power cord.
Is there a warranty?
Philips documentation states a 2-year warranty. In the UK, the Consumer Rights Act 2015 also gives you rights against the seller if goods are faulty, including a 30-day right to reject.
Crisp laundry, in less time.
8 bar · 150 g/min · 600 g steam boost · 2400 W · 1.8 L tank. The price changes often on Amazon: check it, along with the seller, the PSG6064/80 model number, the UK plug and the returns policy, before you order.
Check the price on AmazonAffiliate link · new tab
